Heavy Truck Wheel Taper Roller Bearing F-566425 H195 800792AC For Scania Volvo Renault

Heavy Truck Wheel Bearing F-566425.H195/ 800792AC For Scania Volvo Renault

Bearing Details

Wheel bearing and wheel hub assembly

Traditional car wheel hub belt bearings are composed of two sets of tapered roller bearings or ball bearings back to back or face to face, the bearings are installed, and the oil seal and clearance adjustment are performed on the automobile production line. This structure makes it difficult to assemble in the car factory, the cost is high, the reliability is poor, and when the car is in the pit, it also needs to be cleaned, the bearings and the oil adjusted.

Hub bearing units are developed on the basis of standard angular contact ball bearings and tapered roller bearings, which directly convert two sets of composite bearings into one piece (double row angular contact ball bearings and double row tapered roller bearings) , The one-piece wheel hub bearing unit has good assembly performance, can omit configuration and advance clearance adjustment, bearing, light weight, compact structure, large load capacity, inject grease and seal installation in advance (oil), omit the outer wheel seal and maintenance-free Advantages, it has been widely used in automobiles, and there is a trend of gradually expanding its appliexcavatorion in trucks. The use and amount of hub bearing units are also increasing, and now it has developed to the third generation.

Ways to extend bearing life:

1. Correct installation will affect accuracy, life and performance. And fill the bearing with lubricant after installation.

2. Do not allow strong impact, such as hammering, transfer roller pressure

3. Use accurate installation tools and avoid using cloth and short fibers

4. Lubriexcavatore the bearing with high-quality mineral oil to avoid rust, especially in summer

5. General inspection, such as ambient temperature, vibration, noise inspection

6. Keep bearings clean from dirt, dust, pollutants, moisture.

7. Bearings should not be super cold.

Packaging and Logistics

Q: Do you accept ODM and OEM orders?

Answer: Yes, we provide ODM and OEM services for global customers, we are able to customize shells in different styles and different brand sizes, we also customize packaging boxes according to your requirements.

Q: Do you provide free samples?

A: Yes, we provide free small samples for distributors and wholesalers, please note that if your bearing is bigger, we will send you the same material/same brand as the sample. However, customers should bear the shipping cost.

We do not provide free samples to end users.

Q: What is the MOQ?

A: The MOQ for standardized products is 10pcs; for customized products, the MOQ should be negotiated in advance.

Q: How long is the lead time?

A: Usually the delivery time is about 3-7 days, if it is a customized order, the delivery time will be reconfirmed, about 10-15 days.

Q: How to place an order?

A: 1. Send us the model, brand and quantity, consignee information, shipping method and payment terms by email;

2. Make and send to you the proforma invoice;

3. Complete payment after confirming PI;

4. Confirm payment, arrange production.